Dust removal head for containers

This ionizing head with patented tubular tip allows air to pass through its centre allowing access to containers with a neck diameter greater than or equal to 8mm. Type of containers: : vials, lipstick tubes, small plastic parts, etc.

  3 TYPES OF POSSIBLE APPLICATIONS:

BLOWING, PLUNGING AND SUCTION IONIZING HEAD

This ionizing head allows optimal dust removal from deep containers because the tip, via a raise/lower system, can penetrate directly into the product. The tip is ionizing (neutralization of electrostatic charges) and blowing (injected compressed air), which expels visible and non-visible dust which is then sucked into the system’s filters.

BLOWING AND SUCTION IONIZING HEAD

This ionizing head allows optimal dust removal from de all types of containers. The ionizing head is placed a few millimetres from the neck of the product. The tip is ionizing (neutralization of electrostatic charges) and blowing (injected compressed air), which expels visible and non-visible dust which is then sucked into the system’s filters.

IONIZING HEAD BLOWER

his ionizing head can be used to remove dust from all types of containers. The ionizing head is placed a few millimetres from the neck of the product. The tip is ionizing (neutralization of electrostatic charges) and blowing (injected compressed air), which expels visible and non-visible dust.